CPU:
- Intel Socket 1155 for 2nd Generation Processors
- Supports Intel 32 nm CPU
Chipset:
- Intel H61(B3)
Memory:
- 2 x DIMM, Max. 16GB, DDR3 1333/1066 MHz Non-ECC, Un-buffered Memory
- Dual Channel Memory Architecture
Graphics:
- Integrated Graphics Processor
- Multi-VGA output support: DVI/RGB ports
- Supports DVI with max. resolution 1920 x 1200 @ 60 Hz
- Supports RGB with max. resolution 2048 x 1536 @ 75 Hz
- Maximum shared memory of 1748 MB
Expansion Slots:
- 1 x PCIe 2.0 x16
Storage:
- Intel H61(B3) chipset: 4 x SATA 3Gb/s port(s), blue
LAN:
- Realtek 8111E, 1 x Gigabit LAN Controller(s)
Audio:
- VIA VT1708S 8-Channel High Definition Audio CODEC
- Supports: Jack-detection, Multi-streaming, Front Panel Jack-retasking
USB Ports:
- Built-in Controller: 8 x USB 2.0 port(s) (4 at back panel, black, 4 at mid-board)
Back I/O Ports:
- 1 x PS/2 keyboard (purple)
- 1 x PS/2 mouse (green)
- 1 x DVI-D
- 1 x D-Sub
- 1 x LAN (RJ45) port(s)
- 4 x USB 2.0
- 3 x Audio jack(s)
Internal I/O Ports:
- 2 x USB 2.0 connector(s) support(s) additional 4 USB 2.0 port(s)
- 4 x SATA 3Gb/s connector(s)
- 1 x CPU Fan connector(s)
- 1 x Chassis Fan connector(s)
- 1 x S/PDIF out header(s)
- 1 x 24-pin EATX Power connector(s)
- 1 x 4-pin ATX 12V Power connector(s)
- 1 x Front panel audio connector(s) (AAFP)
- 1 x Internal speaker connector(s)
- 1 x Clear CMOS jumper(s)
Form Factor:
- Mini ITX Form Factor
- 6.7 inch x 6.7 inch ( 17 cm x 17 cm )
About Chipset Drivers:
Windows OS automatically installs a generic driver that allows computers to recognize basic motherboard functions. However, to make use of all board components, appropriate chipset drivers must be applied.
If you install this package, the system will receive related information regarding the chipset. Also, this step might improve compatibility and bus transfer speeds, add various changes for sleep state behavior, power saving functionality and others, or include support for new features.
To apply this release, simply make sure your system configuration is supported by this package, get the file, run the available setup, and follow the on-screen instructions. Bear in mind that installing inappropriate chipset drivers can cause computers to malfunction.
In addition to that, do perform a system restart after you have completely applied the present release so that all changes take effect. Despite the off-chance that other OSes might be compatible, we do not recommend installing any software on platforms other than the highlighted ones.
That being said, check the supported platforms, click the download button and apply the chipset driver. Moreover, don’t forget to check with our website as often as possible to stay up to date with the latest releases.
Comments not found